Fig.1 und Fig.2*: Full welding: all crossing points are welded. There are at least 3 bars where the mat starts and finishes; at least 2 additional bars must be arranged when the internal dimension is more than 4,000 mm. The welding points in the mesh drawing have to be marked for checking and completion. These meshes have to be identified with "DYN" on the mesh drawing and in the mesh list (list of materials). Fig.3*: Partial welding: not all crossing points have to be welded. At least 2 welding rows have to be arranged on all mesh edges. The welding points have to be marked in the mesh drawing for checking and completion. These meshes have to be identified with "DYN" on the mesh drawing and in the mesh list (material list). *) Suitable for not predominantly dead loading.
